Cette page a été traduite avec Google Traduction

Bibliothèque de spécifications d'équipement

Informations de base sur le modèle

  • Fabricant:
    Vermeer
  • Modèle:
    D10x15
  • Taille de plate-forme:
    0 - 10,000 lbs Pullback

Voir les fabricants Voir les modèles

Caractéristiques

Weight 17 kg
Ground Drive Speed 1.5 mph 2.4 km/h
Length 15' 8'' 478 cm
Pullback 10000 lbs 4535.9 kg
Min Bend Radius 29.1 m
Max Flow 13.5 gpm 51.1 L/min
Height 86.5'' 219.7 cm
Max Spindle Speed 180 rpm 180 rpm
Make and Model Perkins
Max Pressure 750 psi 51.7 bar
Entry Angle 16 degrees
Rod Carrying Capacity 440'
Pipe Diameter 1.66” 4 cm
Drill Stem 10' 0'' 3m
Manufacturer's Gross HP Rating 50 hp 37.3 kw
Weight 8980 lbs 4073.3 kg
Rated Engine RPM 3000 rpm 3000 rpm
Fuel Tank Capacity 17 gal 64.4 L
Width 35.5'' 91cm
Max Carriage Speed 90 ft/min 27.4 m/min
Hydraulic Tank Capacity 23 gal 87.1 L
Engine Perkins
Min Bore Diameter 3" 7.6 cm
Type Forged
Pump Pressure 750 psi
Thrust 10000 lbs 4535.9 kg
Rod Loader yes - optional
Length 10 Ft. 3 m
Pump Output 13.5 gpm
Fluid Tank 55 gal 208.2 L
Joint Diameter 42 mm

Information additionnelle

Oil-well drilling installation
Length: 478 cm
Width: 91 - 124 cm
with linkage change mechanism: 107 - 124 cm
Height (in operating position): 219.7 cm
Operating weight
with linkage box: 3447 kg
with linkage box and
autom. Linkage change-over switch: 3946 kg
hydr. Tightening device: Yes
Driving speed: 2,4 km/h
integrated drill pipes: Yes
autom. Linkage change-over switch: (optionally)
stationary anchoring system: Yes
Work slip thrower: Yes

Operational data
max. Number of revolutions: 180 U/min.
max. Torque: 2031 Nm
effect. Feed motion u. Pull-back power: 4536 kg
electrical. System: 12 V

Suspension system
Option 1:
max. Mechanical handling capacity: 51.10 l/min.
Option 2:
Use of other high pressure suspension plants
possible.

Drive
Engine: Perkins®
Achievement: 50 PS/37 KW
max. Revolutions: 3000 U/min.

Drill pipes
one-piece forged: Yes
Single length: 3 m
Diameter: 42 mm
Bending radius: 29.1 m
Weight: 17 kg

Drilling parameter
min. Hole diameter: 80 mm
The drilling head works with all well-known
Detection systems.
max. Drilling length varies *)
*) Dependent on ground condition,
Hole diameter and weight too
shifting product.

Amount of filling
Hydraulic oil: 87 l
Engine oil inclusive. Filter 8.2 l
Fuel: 64 l

---------------------

DIMENSIONS AND WEIGHTS
Weight: 8980 lbs (4073.3 kg)

ENGINE
Make and Model: Perkins
Maximum Engine RPM: 3000 rpm
Gross Horsepower: 50 hp (37.3 kw)
Net Horsepower: 47 hp (35.1 kw)

OPERATIONAL
Thrust: 10000 lbs (4535.9 kg)
Pullback: 10000 lbs (4535.9 kg)
Maximum Carriage Speed at Maximum Engine RPM: 90 ft/min (27.4 m/min)
Maximum Spindle Speed at Max Engine RPM: 180 rpm
Minimum Bore Diameter: 3 " (7.6 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 1.5 mph (2.4 km/h)
Automated Rod Loader: Yes- optional
Drill Rack Angle: 16 deg

FLUID CAPACITIES
Fuel Tank: 17 gal (64.4 L)
Engine Crankcase with Filter: 8.7 qt (8.2 L)
Hydraulic Tank: 23 gal (87.1 L)
Drilling Fluid System Option One
Maximum Flow: 13.5 gpm (51.1 L/min)
Maximum Pressure: 750 psi (51.7 bar)
On Board Tank Capacity: 55 gal (208.2 L)

FEATURES
Breakout System: Hydraulic - open top
Stakedown System: Yes - stationary

Voir les fabricants Voir les modèles

Cette information est fournie à des fins d'information seulement. HDD Broker LLC ne peut garantir l'exactitude ou l'exhaustivité de ces informations. Cette information est sujette à changement par le fabricant. Certaines spécifications peuvent varier selon l'année du modèle.

HDD Broker utilise des cookies et collecte des informations personnelles sur ses sites web.

Pour en savoir plus, consultez les règles de confidentialité et de cookie de HDD Broker. En cliquant sur "J'accepte", vous indiquez que vous avez réglé les paramètres de votre navigateur en fonction de vos préférences et que vous acceptez l'utilisation des cookies par HDD Broker.

x