Deze pagina is vertaald met Google Translate

Apparatuurspecificaties Bibliotheek

Algemene modelinformatie

  • Fabrikant:
    Vermeer
  • Model:
    D10x14
  • Uitrusting grootte:
    0 - 10,000 lbs Pullback

Bekijk fabrikanten Bekijk modellen

Bestek

Make and Model Kubota D-15-5
Hydraulic Tank Capacity 18 Gal 68 L
Fluid Tank 25 gal 94.6 L
Torque 1400 ft-lb 1898.1 Nm
Fuel Type Diesel
Engine Cooling System 6 qt 6 L
Joint Diameter 1.66” 4 cm
Engine Kubota- D-1505 Diesel
Manufacturer's Gross HP Rating 47 hp 35 kw
Length 10' 3 m
Entry Angle 20 degrees
Length 198" 503 cm
Rod Loader Semi-automated
Fuel Tank Capacity 8 gal 30 L
Ground Drive Speed 1.5 mph 2.4 km/h
Pipe Diameter 1.66" 4 cm
Rod Carrying Capacity 350' 107 m
Weight 38 lbs 17 kg
Width 45.5 lbs 116 cm
Min Bend Radius 95.5' 29.1 m
Emissions Compliance Tier II
Weight 7600 lbs 3455 kg
Thrust 9600 lbs 4354.5 kg
Max Speed 3150 rpm 3150 rpm
Min Bore Diameter 2" 5 cm
Height 67" 170 cm
Rated Engine RPM 3000 rpm 3000 rpm
Max Carriage Speed 125 ft/min 38.1 m/min
Max Flow 9 gpm 34.1 Lpm
Pullback 9600 lbs 4354.5 kg
Number of Cylinders 4
Max Spindle Torque 1400 ft-lb 1898 Nm
Max Pressure 750 psi 51.7 bar
Displacement 91.4 cu-in 1.8 L
Max Spindle Speed 180 rpm 180 rpm
Type Forged

Extra informatie

ENGINE
Make and Model: Kubota V1505-T-E
Fuel Type: Diesel
Maximum Engine RPM: 3150 rpm
Idle Speed: 1400 rpm
Rated RPM: 3000 rpm
Gross Horsepower: 44.2 hp (33 kw)
Net Horsepower: 42 hp (31.3 kw)
Torque (Maximum): 87.5 ft-lb (118.6 Nm)
Displacement: 91.4 cu-in (1.8 L)
Number of Cylinders: 4
Aspiration: Turbocharged
Max Fuel Consumption: 2.6 gph (9.7 Iph)
Air Cleaner: Donaldson RadialSeal FPG065411
EPA Certification Family: Tier 2
Maximum Operating Angle (Fore/Aft)*: 20 degrees

OPERATIONAL
Thrust: 9600 lbs (4354.5 kg)
Maximum Carriage Speed at Maximum Engine RPM: 125 ft/min (38.1 m/min)
Maximum Spindle Torque (Low at Maximum Engine RPM): 1400 ft-lb (1898.2 Nm)
Maximum Spindle Speed at Max Engine RPM: 180 rpm
Minimum Bore Diameter: 2.3 " (5.7 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 1.5 mph (2.4 km/h)
Automated Rod Loader: Yes, Semi-automated
Noise Level at Operator's Ear: 90
Drill Rack Angle: 12 deg

ELECTRICAL SYSTEM
Voltage: 12
Battery CCA Rating: 800
Alternator Current Rating: 40
Battery Group Class: MTP

HYDRAULIC SYSTEM
Auxiliary Pump Flow at Maximum Engine RPM: 8 gpm
Auxiliary Pump Relief Pressure: 1200 psi (82.7 bar)
Thrust/Pullback Pump Flow at Max Engine RPM: 21 gpm (79.5 L/min)
Thrust/Pullback Pump Relief Pressure: 3100 psi (213.7 bar)
Rotation Pump Flow at Maximum Engine RPM: 26.5 gpm (100.4 L/min)
Rotation Pump Relief Pressure: 3000 psi (206.8 bar)
Drilling Fluid System Option One
Maximum Flow: 9 gpm (34.1 L/min)
Maximum Pressure: 750 psi (51.7 bar)
On Board Tank Capacity: 25 gal (94.6 L)

FEATURES
Breakout System: Yes - Hydraulic, open-top
Stakedown System: Yes - stationary

Bekijk fabrikanten Bekijk modellen

Deze informatie wordt alleen ter informatie verstrekt. HDD Broker LLC kan niet instaan voor de nauwkeurigheid of volledigheid van deze informatie. Deze informatie kan door de fabrikant worden gewijzigd. Sommige specificaties kunnen per modeljaar verschillen.

HDD Broker maakt gebruik van cookies en verzamelt persoonlijke informatie op haar websites.

Lees voor meer informatie het privacybeleid en cookiebeleid van HDD Broker. Door op "Ik ga akkoord" te klikken, geeft u aan dat u uw browserinstellingen hebt aangepast aan uw voorkeuren en akkoord gaat met het gebruik van cookies door HDD Broker.

x